800-2500 MHz 3 dB Gain Ceiling Omni Antenna
Smart Electronics Communication manufactures ceiling omni antenna for 800-2500 MHz 3 dB Gain Ceiling Omni Antenna so as to provide the best advancement in cell phone signals .
Specification:
| Model: SCO0825G3 | ||
|---|---|---|
| Electrical Specification | ||
| Frequency | 800~960/1710~2500 MHz | |
| Bandwidth | 160/790 MHz | |
| Gain | 3/5 dBi | |
| Polarization | Vertical | |
| Horizontal Beam-width | 360° | |
| Vertical Beam-width | 70° | |
| Front to Back ratio | ≥13 dB | |
| Axial ratio | ±2 dB | |
| VSWR | ≤1.5:1 | |
| Impedance | 50 ohm | |
| Maximum Input Power | 50 watt | |
| Mechanical Specification | ||
| Weight | 0.45 Kg (0.99 lb) | |
| Packing Box Dimension | 18x18x10 cm | |
| Connector | N-female | |
| Mounting | Ceiling | |
| Operating Temperature | -40° C to 70° C | |
Features:
These indoor ceiling omni antennas are designed to operate in Cell Phone frequency band (800-2500 MHz). These antennas are ideal for cell phone signal boosters in GSM 900/1800 MHz, 2G, WCDMA, 3G frequency bands. Its All three bands in one small pack. This cell phone wide band antenna eliminates the need to purchase different antennas for each frequency. These antennas are light in weight, very handy to install or fix at the ceiling of a room. The antennas are used for both indoor cell phone signal boosting purpose. These ceiling omni antennas of GSM/2G/3G band are supplied with a 0.3 meter coax cable. For power input it has one N-female connector fixed at end of coax cable.
Our antennas are designed to provide the best gain in cell phone GSM/2G/3G band for high quality voice and data transfer. Omni directional antenna pattern allows cell phone signals to spread equally without antenna alignment technique.
Application:
- Indoor Cell Phone signal booster
- Cell phone repeater applications
- Cell Phone signal booster in a building Basment
- Cell phone signal Jammer
- Indoor 2G 3G Signal booster
- Wireless mobile internet signal booster
Take A Wise Step!!!
If you are seeking for Quality and Performance of the antennas then contact
800-2500 MHz 3 dB Gain Ceiling Omni Antenna
The 800-2500 MHz 3 dB Gain Ceiling Omni Antenna from SEC Antenna is designed for indoor wireless communication and cellular signal distribution. Manufactured by Smart Electronics Communication, model SCO0825G3 supports selected frequency bands used by GSM and other mobile communication systems. A ceiling-mounted design helps distribute signals across a room without requiring users to point the antenna toward a specific direction. This layout can simplify planning where several users need indoor connectivity, while keeping the antenna away from desks and equipment.
Reliable Indoor Signal Coverage
An omnidirectional antenna radiates or receives signals across 360 degrees in the horizontal plane. The 800-2500 MHz 3 dB Gain Ceiling Omni Antenna is suitable for installations where coverage throughout an indoor area is more important than a narrow, directional beam. It can be considered for compatible cellular signal boosters, repeaters and wireless communication systems, subject to the frequency bands and requirements of the equipment being used.
The 800-2500 MHz 3 dB Gain Ceiling Omni Antenna uses ceiling mounting to sit above occupied space and can support a neat, low-profile installation in offices, commercial buildings, basements and other indoor locations.
Key Product Features
The 800-2500 MHz 3 dB Gain Ceiling Omni Antenna is designed for selected operating bands between 800–960 MHz and 1710–2500 MHz. For the 800-2500 MHz 3 dB Gain Ceiling Omni Antenna, the product specification lists 3/5 dBi gain, vertical polarisation and a 360-degree horizontal beamwidth. These characteristics make it suitable for applications requiring broad horizontal coverage across supported frequency ranges.
The listed VSWR is 1.5:1 or lower, with a 50-ohm impedance and maximum input power of 50 watts. The antenna uses an N-female connector and ceiling mounting arrangement. SEC Antenna lists an operating temperature range of -40°C to 70°C. Confirm the 800-2500 MHz 3 dB Gain Ceiling Omni Antenna matches the equipment datasheet before installation.
Technical Specifications
Model: SCO0825G3
Frequency: 800–960 / 1710–2500 MHz
Bandwidth: 160 / 790 MHz
Gain: 3 / 5 dBi
Polarisation: Vertical
Horizontal beamwidth: 360°
Vertical beamwidth: 70°
VSWR: ≤ 1.5:1
Impedance: 50 ohms
Maximum input power: 50 watts
Connector: N-female
Mounting: Ceiling
Weight: Approximately 0.45 kg
Applications
The 800-2500 MHz 3 dB Gain Ceiling Omni Antenna can be used in compatible indoor cellular signal booster and repeater installations. It may also suit GSM 900/1800 MHz and compatible 2G or 3G systems when the connected equipment supports the relevant frequencies. Check local regulations and equipment requirements before deploying signal boosting or repeating equipment.
For the 800-2500 MHz 3 dB Gain Ceiling Omni Antenna to work effectively, place it in a suitable central location and use quality coaxial cable with compatible connectors. Avoid routing the cable near sources of strong electrical interference, and follow the signal booster manufacturer’s guidance for separation between indoor and outdoor antennas.
Why Choose SEC Antenna?
SEC Antenna designs and manufactures antennas and RF communication accessories for wireless data and voice applications. The 800-2500 MHz 3 dB Gain Ceiling Omni Antenna offers a compact ceiling-mounted option for users who need broad indoor coverage across its supported bands. Its specifications help system integrators assess frequency compatibility, gain, connector type, and installation requirements before selecting a solution for their specific project requirements.
For product details, availability or technical guidance, contact SEC Antenna and share your operating frequencies, installation environment and connected equipment model. Provide details about the required coverage area and existing signal source to help the team review your needs. The team can help assess whether the 800-2500 MHz 3 dB Gain Ceiling Omni Antenna matches your application and system requirements, including connector compatibility and installation constraints. Review specifications before ordering or installation begins onsite.